Unzip and keep all files in same directory.

9x141Lib.dll must be in current directory or your Windows DLL directory (usually c:\windows)

Run VB6_M141.EXE, or open VB6_M14.VBP and run from  within project workspace.

Default configuration for single channel scan at rate approaching 1000 hertz.

Digital input is available anytime, and is also autmatically updated whenever
the "Get one Conversion" button is pressed or with each scan in scanning mode.

Optically isolated outputs are controlled using the "ext-chan" combo box.

See end of  VB141.CFG configuration file for explanation of the lines in that file.
If you must edit that file, do so with care and be sure to keep a backup of the original.

Debugging is set to 3 by default. Valid debug levels are 0-4. The higher value writes
more information to  "141debug.txt"  from DLL.

