The configuration (201EWIN.cfg) included with this archive was created
at the factory using typical settings. This default file may not work
for you. Specifically, the COM-port setting may be incorrect. To
create your own configuration file, please run either the application
"bc5_app.exe" located in the "bc5_app.zip" archive at our website, or
one of the QuickBasic applicatons also available at our website.

The files in this archive make use of the 32-bit Windows DLL "NT_M201.dll"
located in the "NT_M201.zip" archive in the same directory at our website
where you obtained this archive. Please make sure that you have the most
recent version placed in your Windows directory before attempting to run
the application in this archive.

Note that the sample code included in this archive is intended to be used
only as a template from which to create your own applications. Much error
checking etc. has been excluded. In particuliar, note that the log files
created within scanning mode overwrite pre-existing log files of the same
name.

The calibration scan is not implemented in sample applicaton. Contact factory
for more information.

Update 10-21-99
Tim Van Dusen - programmer